PLF-BIII-EX電子振動開關可以連續監測離心機機器的振動。如果機器的振動超過允許值，將提供報警或關閉機器電源，保護機器不受損傷。在大多數情況下，振動可以在機器損壞前的相當長時間內體現機器的問題。例如，振動監測可以比溫度監測早得多的探測出機器的可能出現的故障。PLF-BIII-EX主要監測以下主要的機器故障種類:轉子不平衡、不對中、軸承損壞、皮帶損壞。

PLF-BIII-EX電子振動開關技術參數

功能說明:

采用集成的專業電子電路，整個系統無機械部件。

安裝簡便，僅需3只螺絲固定。

繼電器報警，提供常開的觸點輸出，可以配接PLC、DCS，現場控制繼電器或者直接控制旋轉機械4-20mA總振動有源輸出，直接驅動顯示器。

內部數碼管顯示，方便用戶檢測

防爆、環境防護，全封閉的鋁外殼。

可靠性遠大于機械式振動開關

電氣指標

電源電壓:AC220V/50Hz或DC 24V

線性誤差:<2%(滿量程)

量程:0~50.0mm/s

頻率范圍:10~1000Hz(特殊可定制)

報警范圍:0~99%(滿量程內任意設定)

報警延時:1~60S

繼電器觸點容量:2A/220VAC或1A/28VDC

電流輸出:4~20mA;驅動5000的負載

物理指標:

防護等級:IP65

防爆標志:ExdIICT6

外形尺寸:140WX140 LX90Hmm

安裝尺寸:116X116mm(正三角形)

安裝螺紋規格:M6X14mm(螺栓)

重量:約1kg

環境指標:

溫度:工作溫度-25°C到+65°C，存儲溫度-40°C到+70°C。

相對濕度≤90%

工作壓力:1.0MPa

The PLF-BIII-EX electronic vibration switch can continuously monitor the vibration of the centrifuge machine. If the vibration of the machine exceeds the allowable value, it will provide an alarm or shut off the machine power to protect the machine from damage. In most cases, the vibration can reveal the problems of the machine before it causes damage. For example, vibration monitoring can detect possible machine failures much earlier than temperature monitoring. The PLF-BIII-EX mainly monitors the following main types of machine failures: rotor imbalance, misalignment, bearing damage, and belt damage.

Technical parameters of PLF-BIII-EX electronic vibration switch

Function Description:

Using integrated professional electronic circuits, the entire system has no mechanical components.

Installation is simple; only three screws are needed for fixation.

Relay alarm provides a normally open contact output. It can be connected to PLC, DCS, for on-site control of relays or directly control rotating machinery with 4-20mA active output, and directly drive the display.

Internal digital display, facilitating user inspection

Explosion-proof and environmental protection, with a fully enclosed aluminum casing.

The reliability is much higher than that of mechanical vibration switches.

Electrical indicators

Power supply voltage: AC 220V/50Hz or DC 24V

Linear error: < 2% (full scale)

Range: 0 - 50.0 mm/s

Frequency range: 10 - 1000 Hz (customizable options available upon request)

Alarm range: 0 - 99% (can be set within the full range)

Alarm delay: 1 to 60 seconds

Relay contact capacity: 2A/220VAC or 1A/28VDC

Current output: 4 - 20mA; drives a load of 500

Physical indicators:

Protection level: IP65

Explosion-proof mark: ExdIICT6

Dimensions: 140W x 140L x 90H cm

Installation size: 116X116mm (equilateral triangle)

Installation thread specification: M6X14mm (bolt)

Weight: Approximately 1 kilogram

Environmental indicators:

Temperature: Operating temperature -25°C to +65°C, Storage temperature -40°C to +70°C.

Relative humidity ≤ 90%